Skip to content

Built Once. Built Right.

Timber roof and wall framing in a renovation

Home Extensions · Ryde NSW 2112

Home extensions in Ryde, done properly.

Rear and side house extensions for Ryde homes by a licensed extension builder. Most extensions run $70,000 to $300,000 depending on size and how much of the existing house has to change, itemised quote, honest programme, one builder from concept to handover.

Master Builders Association NSW member
NSW Licensed Builder
487370C

Rated 5.0 by our clients on Google

City of Ryde Council areaNSW Builder’s Licence 487370CItemised quotesClear inclusions & exclusions0450 605 080

Extending out, not up

Ryde blocks have the room to extend.

Strava Group builds home extensions in Ryde: rear additions, side extensions and whole-of-back transformations that open the house to the yard. Ryde is one of the oldest suburbs on the north side of the river, with Federation and interwar homes around the town centre and Top Ryde, and a large stock of 1950s and 60s brick on the streets either side of Victoria Road and down toward the water. The blocks are decent, the houses are mostly single storey, and the back is where the room to grow usually is.

In Ryde we regularly deliver:

  • Rear extensions and additions
  • Side extensions on wider blocks
  • Open plan kitchen, dining and living
  • Alfresco and indoor-outdoor connections
  • New master suites and family rooms
  • Laundries, mudrooms and storage done properly
  • Structural openings between old and new
  • Exterior upgrades to tie old and new together

Thinking about going up instead? That is a different build with different engineering, and we do that too: see second storey additions in Ryde.

A 1960s Ryde brick home with a galley kitchen, a separate dining room and a concrete patio out the back is the brief we see most. Open the back, bring the kitchen into the light, and connect it to the yard.
Kitchen with tall timber-look cabinetry, white cabinets and a new timber-framed window
?

Quick Answer

Most home extensions in Ryde run $70,000 to $300,000 depending on size and how much of the existing structure has to change, at roughly $2,500 to $4,500 per square metre for ground floor work, with around $30,000 in preliminaries (design, engineering and council approvals, plus site set-up) on top. The block sizes here support proper open plan extensions, which tends to put projects in the middle of the band, with sloping sites adding to it.

Local knowledge

What we know about extending in Ryde.

Every suburb builds a little differently. This is what matters when you are extending a Ryde home.

Council

Ryde sits in the City of Ryde Council area under the Ryde Local Environmental Plan 2014 and the Ryde Development Control Plan. Most detached homes on standard residential zoning can pursue a ground floor extension through Complying Development with a private certifier rather than a full DA, subject to setbacks, site coverage and landscaped area. Heritage items and a small number of conservation streets near the town centre go to a DA. We confirm the pathway for your property before quoting. Current planning controls are published by City of Ryde Council and on the NSW Planning Portal.

Housing stock

Federation and interwar homes on the older streets around the town centre and Top Ryde, a large stock of 1950s and 60s full brick and brick veneer houses across the rest of the suburb, and later two storey homes toward the river. Apartment development has concentrated around Top Ryde and Victoria Road, but the streets behind are still overwhelmingly detached houses on their original blocks, which is where extensions make sense.

Structure

Mid-century brick veneer homes are straightforward to extend, with timber framed walls and framed roofs that take a new structural opening well once the load path is engineered. The older full brick and Federation houses need more care at the junction: we cut the openings cleanly, install engineered steel and tie the new frame into the existing brickwork properly.

Yard and block

Standard Ryde blocks are typically 550 to 800 square metres, many of them with a fall toward the Parramatta River or the creek lines. That leaves room for a full width rear extension while keeping a real backyard, but the slope drives the footing design and the cost, so we check it early and on site. Side access is usually workable.

Services and ground

Ryde sits on shale derived clay soils that move with moisture, with Hawkesbury sandstone close to the surface on the slopes toward the river. Footing design varies across the suburb, so the engineering is done for your site, and new footings are detailed against the existing ones so the extension does not settle away from the house. Sewer lines often run along the rear of the block and are located before design starts.

Value

Ryde is a well connected suburb with Top Ryde, the bus corridors to the city and Macquarie Park, and strong school catchments holding demand. A well built extension that converts a dated rear layout into open plan living with a genuine yard connection is one of the most reliable improvements you can make here, and it usually costs less than the stamp duty and agent fees involved in moving to a bigger house nearby.

Built Once. Built Right.

See exactly how we build, and why

Four-coat waterproofing, tensioned X bracing, hand-cut roofs and inspections you can check yourself. Every method explained, including what’s standard and what’s an upgrade.

Start here

Tell us about your Ryde home.

No sales pitch, no obligation. Here is exactly what happens when you enquire:

  1. One at a time, takes about two minutes, so the first conversation is about your project rather than the basics.

The Strava standard

How we build differently.

An extension lives or dies at the junction between old and new. We build for longevity, and on every Ryde extension we run:

Every new-to-existing junction properly detailed

This is where most extensions crack, leak and part company with the house. It is almost always a detailing shortcut, not settlement. Ours get a proper structural tie, flashing and movement detail.

The existing structure gets rectified, not covered

Where the extension meets the house, we screw off and re-brace the adjoining structure, tying new and old together so the whole building moves as one and future cracking is designed out, not painted over.

Footings matched to the ground, not the minimum

New footings are engineered for your soil and detailed against the existing ones, because differential movement between old and new slabs is the classic extension failure, and the mix of clay and shallow sandstone across Ryde means the engineering is done for your site, not copied from a neighbour.

Furring channels for a dead flat finish

Where new ceilings and walls run through to existing rooms, furring channels give one level plane across both, so you cannot see where the house ends and the extension begins.

Waterproofing is a documented hold point

New wet areas are inspected and photographed before a single tile goes on, to AS 3740, and new roof-to-old-roof junctions get the same treatment.

Everything photographed before it is covered

You receive the record at handover, so in ten years you know exactly what is behind your walls and under your floor.

Before starting Strava Group, I spent seven years on the tools as a carpenter and five years running sites. The failures I kept seeing in extensions were always at the join: cracked cornices along the old wall line, roofs that leaked where new met old, floors that stepped as slabs settled differently. None of it was illegal. All of it was avoidable. None of this shows up in a finished-room photo. All of it shows up in year seven.

Honest numbers

What a house extension actually costs in Ryde.

Most builders will not put numbers on a website. We will, because the alternative is wasting your time and ours across three meetings before anyone mentions a figure.

ItemTypical range
Home extension, depending on size and scope$70k–$300k
Ground floor extension work$2,500–$4,500 /m²
Preliminaries, on top of build costapprox. $30,000

Preliminaries are the costs that exist before a single wall moves: design, engineering and council approvals, plus site set-up such as site fencing, temporary services, waste removal, insurances and supervision. They are real, they are unavoidable, and a quote that does not show them separately has either buried them or forgotten them.

In Ryde the block sizes support a proper open plan rear rather than a single room, which tends to put projects in the middle of the band, with sloping sites and older full brick houses adding to it. How much of the existing structure has to change is usually the largest single factor, followed by wet areas and how far the new footings have to go to find good ground.

Every project is quoted properly after a site inspection. These ranges are here so you can decide whether it is worth a conversation.

Good to know

Ryde extension questions.

From our clients

Rated 5.0 on Google.

5.0·Google reviews
We had Strava Group complete major renovation works on our property and were blown away with the quality. The attention to detail and overall finish were amazing.
AT

Aloona T.

Google review

Read our Google reviews

Nearby

Home extensions near Ryde.

We build extensions across the Ryde district and the surrounding suburbs. Select a suburb for local council information and what extensions there typically cost.

Ryde district and surrounds

All Sydney extension areas

Looking for a different service in Ryde? We also build second storey additions in Ryde and home renovations in Ryde.

Extend your Ryde home properly.

Ready for more room?

Tell us about your property and what you want to add. We respond within 24 to 48 business hours with honest advice and real numbers, no cost, no obligation.